Berkeley workshop on micromechanics & materials behavior Bridging the gaps March 6th-7th 2017
When: March 6th and 7th, 2017
Where: UC Berkeley Hearst Memorial Mining Building (HMMB) Room 290
Particpation in international meetings in 2017
UCB-NE-Materials is well represented at several international meetings in 2017
Materials Research Society 2017
David Frazer participates at the MRS meeting in Boston with two presentations.
Microscopy and Microanalysis 2017
David Frazer, Evan Still and Peter Hosemann participated in the Microscopy and Microanalysis meeting 2017.
The team published two proceedings at this meeting.
The image below shows Evan Still at the CAMECA booth trying the new atom probe tomography data visualization software.
Environmental Degradation 2017
Hi Vo, Cameron Howard and Peter Hosemann participate in the Environmental Degradation Conference in Portland Oregon.
Particpation in international meetings in 2018
ANS 2018 in Philadelphia
Novel Approach to Advanced Nanostructured Materials Manufacturing, J. J. Graham (Univ.
Calif., Berkeley), K. Sridharan, B. R. Maier, H. Yeom (Univ. Wisconsin, Madison), Peter Hosemann (Univ. Calif., Berkeley)
The Influence of Al Content in Steels and Oxygen Concentration in Liquid LBE on the Corrosion Protection of Structural Steel Candidates for Generation IV FBRs, Miroslav P. Popovic, Yun Yang, Peter Hosemann (Univ. Calif., Berkeley)
Synthesis, Sintering, and Thermophysical Properties of Thorium Mononitride, Stephen S. Parker (Univ. Calif., Berkeley & ORNL), Joshua T. White (ORNL), Peter Hosemann (Univ. Calif., Berkeley), Andrew T. Nelson (ORNL)
Enhanced Plasticity in 33 dpa Neutron Irradiated 304SS with 2-3.7% Swelling, H. Vo (Univ. Calif., Berkeley), S. Teysseyre (INL), P. Hosemann (Univ. Calif., Berkeley)
Micro-Cantilever Testing of Environmental Barrier Coatings on CVD SiC, Joseph Kabel, Peter Hosemann (Univ. Calif., Berkeley), Takaaki Koyonagi, Yutai Katoh (ORNL)
TMS 2018 in Phoenix
Material Selection for Nuclear Engineering Designs a Challenge and
Opportunity to Develop Graded Materials via Additive Manufacturing; Peter Hosemann et al. (invited)
A New Approach to Detect Clusters of Varying Density in Atom Probe
Tomography and Its Applications to Oxide-dispersion Strengthened
Alloys; Jin Wang et al.
In-situ Elevated Temperature Micro-cantilever Testing of UO2; D. Frazer et al.
Localized Helium Implantation Utilizing a Helium Ion Beam Microscope
to Evaluate Swelling and Mechanical Property Changes; P. Hosemann et al.
Experimental Characterization of Micro-scale Failure Mechanisms
and Governing Properties in SiC/SiC Composites; J. Kabel et al.
Simulation of SiC-SiC Composite Micro-pillar Compression as an
Investigation of Fiber/Matrix Interface Properties; I. Love et al.
High-throughput Nanomechanical Characterization of Fe-alloys for
Service under Extreme Conditions; N.Mara et al.
Investigation of the Role of Cr and Cr Carbides at Grain Boundaries
in Alloy 600 for Stress Corrosion Cracking; H. Vo et al.
The Effect of Dpa and Dpa Rate on the Strength and Precipitates Stability
in Ion-irradiated Inconel 718; H. Vo et al.
Swelling Quantification of High Dose Helium Implantation in
Different Materials Using a Helium Ion Beam Microscope: M. Ambat et al.
42nd International Conference and Expo on Advanced Ceramics and Composites
Micro-Mechanical Characterization of the PyC interphase in SiC/SiC composites; J. Kabel