Mechanical Properties: Several research projects within the group investigate how the mechanical properties of given materials change under specific conditions, such as radiation. A core focus of this research is to take advantage of and optimize small-scale mechanical testing techniques. These methods are critical to evaluating specific regions of interest, reducing the hazard of working with radioactive and toxic substances, and accessing thin surface layers in ion-beam-irradiated materials and in thin films.
Nanoindentation, micro compression testing, micro tensile testing, and micro bend testing are techniques employed in this research to obtain property data. However, in order to understand and fully appreciate the changes of a material’s mechanical properties, it is essential to pinpoint the microstructural features that cause these changes and to correlate the observed structures with the observed properties. Only the combination of both, structure and property, leads to a comprehensive understanding of the material.
Nanoindentation allows for fast and efficient mapping of materials properties, including hardness and elastic modulus. The tools listed under the facilities tab are used to evaluate the properties of a material on a localized scale.
Micro compression provides further insight by probing localized volumes that exhibit artifacts of interest (grain boundaries, interfaces, etc.). Direct measurements of yield strength and critical resolved shear stress are possible. This approach is applicable for nanometer to micrometer sized samples and can be carried out in-situ in transmission electron microscopes and scanning electron microscopes, such that dislocations and other deformation mechanisms can be observed in real time.
Further materials examination techniques like micro 3-point bend testing and micro tensile testing provide more insight into post-yielding behavior. Specifically, micro tensile tests provide properties like total and uniform elongation and ultimate tensile strength (UTS). It is found that the properties that are measured on the micro scale match well with the properties on the macro scale, and therefore micro-scale measurements enable the assessment of mechanical properties for ion-beam-irradiated materials and similar materials that are inherently limited in sample size and availability.
Microstructure Analysis: Microstructural investigations give insight to the root cause of changing mechanical properties. Furthermore, one can assess the influence of plastic deformation on the properties at a local region and begin to impose these data across the material as a whole. For example, being able to see how plastic deformation changes the irradiation-induced microstructure is an essential factor in understanding the behavior and eventual lifetime of a material.
TEM image of He-bubble superlattice in Cu, implanted using the ORION Nanofab (Z. Wang)
TEM image of He bubbles implanted into a Cu surface to high doses using the ORION Nanofab (Y. Yang)
Solidification cells on an additive manufactured steel (A. Reichardt)
Intermetallic precipitates on an additive manufactured steel (D. Frazer)
Many engineering environments are non-ambient. In order to understand how a material reacts in a non-ambient environment, simulated and well-controlled conditions must be applied. Our research team focuses on high-temperature and liquid-metal environments, such as can be found in liquid-metal-cooled reactors and solar concentrators. The autoclaves are used to carry out long-term testing to evaluate corrosion rates. The material degradation is subsequently characterized through microscopy studies.
Current efforts are focusing on high-temperature heavy metals (e.g., lead-bismuth eutectic) in static, oxygen-controlled environments. The aim of this project is to provide sufficient oxygen in the liquid metal such that the submerged steel can form a protective oxide layer that prevents catastrophic dissolution.
In addition to liquid-metal corrosion, oxidation of reactor-grade materials in high-temperature steam environments is of interest to aid the development of accident-tolerant fuels. Fe-Cr-Al alloys as well as Mo and SiC are investigated for this purpose.
The question is, “How does irradiation change the mechanism of materials degradation and corrosion?” In order to study these phenomena, an Irradiation and Corrosion Experiment (ICE) was developed together with Los Alamos National Laboratory. The experimental designs and the results of the first experiment are presented in the following two publications:
Understanding and predicting a material’s behavior in its environment is important, and the ability to optimize these properties via material design and fabrication is even more so. This leads us to the question, “How can we produce materials which are more capable and also mitigate the degrading effects that are often observed with applications in nuclear and other extreme environments?”
On a larger scale, we are evaluating the use of additive manufacturing to produce functionally graded components. This usage not only would take advantage of additive manufacturing’s ability to create unique geometries but would also allow for property transitions as a material gradient is fabricated. Several functionally graded metal components have been prepared by our collaboration partners in conjunction with Thermocalc modeling predictions that we performed at UCB. Post-fabrication microstructural and property investigations have been carried out to assess the quality of these graded materials as a function of the fabrication parameters.
On a smaller scale, we investigate alternate routes to manufacture true 3D nanostructured materials. Examples include powder processing via cold compacting, and direct PVD processing of insoluble or solubility limited materials (Cu/Nb, Cu/Fe). It was found that solid nanostructured materials can be produced at a macroscopic scale using this route. The large number of fcc/bcc interfaces are thought to be efficient defect sinks for radiation-induced damage, enabling the material to be resilient in extreme radiation environments.
Engraving the Berkeley logo on a steel surface at the meso scale using femto second laser machining.
In-situ micro tensile testing of a F/M steel with Pt markers on it. (H. Vo)
In-situ mechanical testing of nanotwinned Cu (Z. Wang)
Micro tensile testing of Irradiated and unirradiated single crystal Nickel. A. Reichardt, M. Ionescu, J. Davis, L. Edwards, R.P. Harrison, P. Hosemann. D. Bahattacharyya, In situ micro tensile testing of He+2 ion irradiated and implanted single crystal nickel film; Acta Mat. 100 (2015) 147-154
High Resolution Transmission Electron Microscope (HRTEM) image of an oxide particle embeded in a bcc matrix (ODS alloy MA957) Y. Wu et al “The crystal structure, orientation relationships and interfaces of the nanoscale oxides in nanostructured ferritic alloys”
Atom Probe Tomography of high dose neutron irradiated MA957 N. Bailey et al “Atom probe tomography analysis of high dose MA957 at selected irradiation temperatures”
Cracks formed in 316l SS formed after exposing the steel to heavy liquid metal with low oxygen content. P. Hosemann et al. “Twin boundary-accelerated ferritization of austenitic stainless steels in liquid lead–bismuth eutectic”
APT of passive layer formed on D9 stainless steel in Lead Bismuth Eutectic
In-situ SEM pillar compression of a SiC-SiC composite interface: real-time, side-by-side comparison of video (right) and curves of load vs. displacement (left) (J. Kabel)
In-situ SEM pillar compression of a SiC-SiC composite interface: real-time, side-by-side comparison of video (right) and curves of load vs. displacement (left) (J. Kabel)
Titanium oxide nanotubes
SiC/SiC composite X-ray tomography collected at the Advanced Light Source (ALS)
Images taken by IISME scholars Armando Gaston Astero and John Savage on various commercial and forged steels.
0.8%C and 0.1% C steel forge welded together.
Widmannstätten structure of Ti-6Al-4V
The following contains a comprehensive list of peer-reviewed publications by the nuclear materials group. To date (11/17/2024), 285 papers have been published since 2008.
2024 (19)
Lam, S., Frazer, D., Cappia, F., Nelson, M., Samuha, S., Pitts, S., Harris, B., & Hosemann, P. (2024). Length scale effects of micro- and meso‑scale tensile tests of unirradiated and irradiated Zircaloy-4 cladding. Journal of Nuclear Materials, 604, 155469. https://doi.org/10.1016/j.jnucmat.2024.155469
Hong, M., deJong, M., Balooch, M., Kaoumi, D., & Hosemann, P. (2024). Effect of thermal oxidation on helium implanted pure iron. Journal of Nuclear Materials, 603, 155377. https://doi.org/10.1016/j.jnucmat.2024.155377
Ika Priyanti, Doonyapong Wongsawaeng, Grittima Kongprawes, Kanokwan Ngaosuwan, Worapon Kiatkittipong, Hosemann, P., Sola, P., & Suttichai Assabumrungrat. (2024). Enhanced cold plasma hydrogenation with glycerol as hydrogen source for production of trans-fat-free margarine. Scientific Reports, 14(1). https://doi.org/10.1038/s41598-024-68729-5
Nelson, M., Samuha, S., Kombaiah, B., Kamerman, D., & Hosemann, P. (2024). Enhanced stress relaxation behavior via basal 〈a〉 dislocation activity in Zircaloy-4 cladding. Journal of Nuclear Materials, 601, 155337. https://doi.org/10.1016/j.jnucmat.2024.155337
Ika Priyanti, Doonyapong Wongsawaeng, Kanokwan Ngaosuwan, Worapon Kiatkittipong, Hosemann, P., & Suttichai Assabumrungrat. (2024). Corona discharge plasma for green de-inking of inkjet printer ink. Scientific Reports, 14(1). https://doi.org/10.1038/s41598-024-63683-8
Shahryar Mooraj, Kim, G., Fan, X., Shmuel Samuha, Xie, Y., Li, T., Tiley, J. S., Chen, Y., Yu, D., An, K., Hosemann, P., Liaw, P. K., Chen, W., & Chen, W. (2024). Additive manufacturing of defect-free TiZrNbTa refractory high-entropy alloy with enhanced elastic isotropy via in-situ alloying of elemental powders. Communications Materials, 5(1). https://doi.org/10.1038/s43246-024-00452-0
Hong, M., Bickel, J. E., Demir, E., Kaoumi, D., & Hosemann, P. (2024). Effect of cryogenic milling on the mechanical and corrosion properties of ODS Hastelloy-N. Materialia, 37, 102215. https://doi.org/10.1016/j.mtla.2024.102215
Prasitthipayong, A., Frazer, D. M., Zhang, R., Vo, H. T., Tumey, S. J., Minor, A. M., & Hosemann, P. (2024). Sample size effect phenomenon in microcompression testing of unirradiated and ion-irradiated 800H steel at high temperatures. Materials Characterization, 215, 114046. https://doi.org/10.1016/j.matchar.2024.114046
Chan, H. L., Romanovskaia, E., Mills, S. H., Hong, M., Romanovski, V., Bieberdorf, N., Chaitanya Peddeti, Minor, A. M., Hosemann, P., Asta, M., & Scully, J. R. (2024). Morphological Evolution and Dealloying During Corrosion of Ni20Cr in Molten FLiNaK Salt. Journal of the Electrochemical Society, 171(8), 081501–081501. https://doi.org/10.1149/1945-7111/ad6037
Nelson, M., Samuha, S., Kamerman, D., & Hosemann, P. (2024). Temperature-Dependent Mechanical Anisotropy in Textured Zircaloy Cladding. Journal of Nuclear Materials, 595, 155045. https://doi.org/10.1016/j.jnucmat.2024.155045
Sahara, T., Doonyapong Wongsawaeng, Kanokwan Ngaosuwan, Worapon Kiatkittipong, Hosemann, P., & Suttichai Assabumrungrat. (2024). Investigation of Kinetic, Equilibrium, and Thermodynamic Modeling of Perfluorooctanoic Acid (PFOA) Adsorption in the Presence of Natural Organic Matter (NOM) by Dielectric Barrier Discharge Plasma-Modified Granular Activated Carbon (GAC). Water, 16(11), 1499–1499. https://doi.org/10.3390/w16111499
Sahara, T., Wongsawaeng, D., Ngaosuwan, K., Kiatkittipong, W., Hosemann, P., & Assabumrungrat, S. (2024). Exploring PFOA adsorption isotherm in the presence of NOM using DBD plasma-modified GAC. E3S Web of Conferences, 530, 02002. https://doi.org/10.1051/e3sconf/202453002002
Hong, M., Shmuel Samuha, & Hosemann, P. (2024). Corrosion mechanism of cold forged 316 stainless steel in molten FLiNaK salt. Corrosion Science, 232, 111990–111990. https://doi.org/10.1016/j.corsci.2024.111990
Taylor, S. D., Kohnert, A. A., Lambeets, S. V., Yano, K. H., Still, E. K., Simonnin, P. G., Hosemann, P., Uberuaga, B. P., Kaspar, T. C., & Schreiber, D. K. (2024). Directly resolving surface vs. lattice self-diffusion in iron at the nanoscale using in situ atom probe capabilities. Materialia, 34, 102078. https://doi.org/10.1016/j.mtla.2024.102078
Xie, Y., Huang, X., Raj, A., Li, X., Dhall, R., Balooch, M., Minor, A., Schroers, J., & Hosemann, P. (2024). Strengthening of Zr-based metallic glass at low dose helium ion irradiation. Journal of Nuclear Materials, 592, 154943. https://doi.org/10.1016/j.jnucmat.2024.154943
Xie, Y., Huang, X., Aldajani, S., Vo, H. T., Jorgens, D. M., Abousleiman, Y., Hull, K., & Hosemann, P. (2024). Preparation of damage-free kerogen specimen for microscopy: Understanding the damage mechanisms induced by ion milling techniques. Geoenergy Science and Engineering, 234, 212607. https://doi.org/10.1016/j.geoen.2023.212607
Parkison, D., Tunes, M. A., Nizolek, T. J., Saleh, T. A., Hosemann, P., & Kohnert, C. A. (2023). Fabrication of bulk delta-phase Zirconium Hydride from Zircaloy-4 for use as moderators in microreactors. Scripta Materialia, 239, 115771. https://doi.org/10.1016/j.scriptamat.2023.115771
Michel, J., Nico Ulff, Henn, M., Simonds, B., Hosemann, P., Zanger, F., Hagenlocher, C., & Graf, T. (2024). Adjusting the microstructure of additively manufactured parts with tailored temperature fields by the combination of powder bed fusion with cw-laser and ablation with ultrashort laser pulses. https://doi.org/10.1117/12.3002302
Moschetti, M., Burr, P. A., Obbard, E., Kruzic, J. J., Hosemann, P., & Bernd Gludovatz. (2024). Corrigendum to “Design considerations for high entropy alloys in advanced nuclear applications” [Journal of Nuclear Materials 567 (2022) 153814]. Journal of Nuclear Materials, 588, 154758–154758. https://doi.org/10.1016/j.jnucmat.2023.154758
2023 (15)
Cheng, D., Wynn, T., Lu, B., Marple, M., Han, B., Shimizu, R., Bhagath Sreenarayanan, Bickel, J., Hosemann, P., Yang, Y., Nguyen, H., Li, W., Zhu, G., Zhang, M., & Ying Shirley Meng. (2023). A free-standing lithium phosphorus oxynitride thin film electrolyte promotes uniformly dense lithium metal deposition with no external pressure. Nature Nanotechnology, 18(12), 1448–1455. https://doi.org/10.1038/s41565-023-01478-0
Sahara, T., Wongsawaeng, D., Ngaosuwan, K., Kiatkittipong, W., Hosemann, P., & Assabumrungrat, S. (2023). Highly effective removal of perfluorooctanoic acid (PFOA) in water with DBD-plasma-enhanced rice husks. Scientific Reports, 13, 13210. https://doi.org/10.1038/s41598-023-40197-3
Heterogeneously catalyzed palm biodiesel production in intensified fruit blender. (2023). Arabian Journal of Chemistry, 16(11), 105273. https://doi.org/10.1016/j.arabjc.2023.105273
Lee, A. C., Parakh, A., Lam, S., Sleugh, A., Tertuliano, O., Doan, D., Weker, J. N., Hosemann, P., & Gu, X. W. (2023). Dynamic fracture processes in hydrogen embrittled iron. Acta Materialia, 259, 119234. https://doi.org/10.1016/j.actamat.2023.119234
Hong, M., Chan, H. L., Scully, J. R., & Hosemann, P. (2023). Corrosion property of Alloy 625 in Molten FLiNaK salt according to the Tellurium Concentrations. Journal of Nuclear Materials, 584, 154548. https://doi.org/10.1016/j.jnucmat.2023.154548
Chan, H. L., Auguste, R., Romanovskaia, E., Morales, A. L., Liedke, M. O., Schmidt, F., Butterling, M., Romanovski, V., Winkler, C., Qiu, J., Wang, Y., Kaoumi, D., Selim, F. A., Uberuaga, B. P., Hirschmann, E., Wagner, A., Hosemann, P., & Scully, J. R. (2023). Corrigendum to “Multi–length scale characterization of point defects in thermally oxidized, proton irradiated iron oxides” Materiala, Volume 28 (2023) 101762. Materialia, 31, 101868. https://doi.org/10.1016/j.mtla.2023.101868
Romanovskaia, E., Ho Lun Chan, Romanovski, V., Garfias, F., Hong, M., Mastromarino, S., Hosemann, P., Raluca Scarlat, & Scully, J. R. (2023). An In Situ, multi-electrode electrochemical method to assess the open circuit potential corrosion of Cr in unpurified molten FLiNaK. Corrosion Science, 222, 111389–111389. https://doi.org/10.1016/j.corsci.2023.111389
Ho Lun Chan, Romanovskaia, E., Hong, M.-S., Romanovski, V., Sur, D., Hosemann, P., & Scully, J. R. (2023). Corrosion Electrochemistry of Chromium in Molten FLiNaK Salt at 600°C. Journal of the Electrochemical Society, 170(8), 081502–081502. https://doi.org/10.1149/1945-7111/ace8c0
Reis, C., Shen, T., Prestemon, S., Hosemann, P., Nair, M., Nakamoto, T., Ogitsu, T.; "Investigating Irradiated Superconducting Magnet Insulation Materials for Particle Accelerators and other High-Dose Environments" IEEE (2023) https://doi.org/10.1109/TASC.2023.3252480
Samuha, S., Bickel, J., Mukherjee, T., DebRoy, T., Lienert, T., Maloy, S., Lear, C., Hosemann, P.; "Mechanical performance and microstructure of the grade 91 stainless steel produced via Directed Energy deposition laser technique" Materials & Design Vol. 227 (2023) https://doi.org/10.1016/j.matdes.2023.111804
Al Dajani, S.A.A., Dacus, B.R., Dennett, C.A., Burke, M.G., Waldron, L., Byun, T.S., Wall, J.J., Anglin, K.B.-D., Al Dajani, O.A.A., Krakowiak, K.J., Ulm, F.-J., Schwartzmann, A., Tasan, C.C., Hosemann, P., Short, M.P.
"Detecting Thermally-Induced Spinodal Decomposition with Picosecond Ultrasonics in Cast Austenitic Stainless Steels" (2023) . DOI: 10.1016/j.actamat.2022.118552
Dong, A., Vo, H., Olivas, E., Bickel, J., Hardie, C., Hosemann, P., Maloy, S. "The effect of sample thickness on micro-mesoscale tensile properties of 304SS, HT-9, and CuCrZr" (2023) DOI: 10.1016/j.jnucmat.2022.154207
Hong, M., Chan, H.L., Xie, Y., Romanovskaia, E., Scully, J.R., Hosemann, P. "Effect of tellurium concentration on the corrosion and mechanical properties of 304 stainless steel in molten FLiNaK salt" (2023) DOI: 10.1016/j.corsci.2022.110913
Wurmshuber, M., Doppermann, S., Wurster, S., Jakob, S., Balooch, M., Alfreider, M., Schmuck, K., Bodlos, R., Romaner, L., Hosemann, P., Clemens, H., Maier-Kiener, V., Kiener, D. "Enhancing mechanical properties of ultrafine-grained tungsten for fusion applications" (2023) DOI: 10.1016/j.ijrmhm.2023.106125
Lee, A.C., Parakh, A., Sleugh, A., Tertuliano, O.A., Lam, S., Weker, J.N., Hosemann, P., Gu, X.W. "Detection of voids in hydrogen embrittled iron using transmission X-ray microscopy" (2023) DOI: 10.1016/j.ijhydene.2022.10.059
2022 (16)
Schoell, R., Kabel, J., Lam, S., Sharma, A., Michler, J., Hosemann, P., Kaoumi, D. "Corrosion behavior of a series of combinatorial physical vapor deposition coatings on SiC in a simulated boiling water reactor environment" (2022) DOI: 10.1016/j.jnucmat.2022.154022
Auguste, R., Chan, H.L., Romanovskaia, E., Qiu, J., Schoell, R., Liedke, M.O., Butterling, M., Hirschmann, E., Attallah, A.G., Wagner, A., Selim, F.A., Kaoumi, D., Uberuaga, B.P., Hosemann, P., Scully, J.R. "A multimodal approach to revisiting oxidation defects in Cr2O3" (2022) DOI: 10.1038/s41529-022-00269-7
Chan, H.L., Romanovskaia, E., Qiu, J., Hosemann, P., Scully, J.R. "Insights on the corrosion thermodynamics of chromium in molten LiF-NaF-KF eutectic salts" (2022) DOI: 10.1038/s41529-022-00251-3
Stevenson, S., Dong, A., Xie, Y., Morrell, J., Voyles, A.S., Bickel, J., Bernstein, L., Maloy, S.A., Hosemann, P. "The effects of high energy deuteron ion beam irradiation on the tensile behavior of HT-9" (2022) DOI: 10.1016/j.nimb.2022.09.001
Hong, M., Morales, A.L., Chan, H.L., Macdonald, D.D., Balooch, M., Xie, Y., Romanovskaia, E., Scully, J.R., Kaoumi, D., Hosemann, P. "Effect of thermal oxidation on helium implanted 316L stainless steel" (2022) DOI: 10.1063/5.0122487
Mukherjee, T., DebRoy, T., Lienert, T.J., Maloy, S.A., Lear, C.R., Hosemann, P. "Tempering kinetics during multilayer laser additive manufacturing of a ferritic steel" (2022) DOI: 10.1016/j.jmapro.2022.08.061
Frazer, D., Connick, R.C., Howard, C., Siddiqui, M., Fritz, R., Kutlesa, P., Hosemann, P. "Mechanical Property Evaluation of CuNb Composites Manufactured with High-Pressure Torsion" (2022) DOI: 10.1007/s11837-022-05376-z
Moschetti, M., Burr, P., Obbard, E., Kruzic, J.J., Hosemann, P., Gludovatz, B. "Design considerations for high entropy alloys in advanced nuclear applications" (2022) DOI: 10.1016/j.jnucmat.2022.153814
Wongjaikham, W., Kongprawes, G., Wongsawaeng, D., Ngaosuwan, K., Kiatkittipong, W., Hosemann, P., Assabumrungrat, S. "Production of low trans-fat margarine by partial hydrogenation of palm oil using nature-friendly and catalyst-free microwave plasma technique" (2022) DOI: 10.1016/j.ifset.2022.103107
Huang, X., Xie, Y., Balooch, M., Lubner, S., Hosemann, P. "Helium implantation in Si (100): Swelling, microstructure, and mechanical property changes" (2022) DOI: 10.1063/5.0096802
Kamjam, M., Wongsawaeng, D., Ngaosuwan, K., Kiatkittipong, W., Hosemann, P., Assabumrungrat, S. "Upgrading palm biodiesel properties via catalyst-free partial hydrogenation using needle-plate dielectric barrier discharge plasma torch" (2022) DOI: 10.1002/er.7944
Schoell, R., Xi, L., West, H., Hosemann, P., Park, J.-S., Kenesei, P., Almer, J., Shayer, Z., Kaoumi, D. "Investigation of the fatigue crack behavior of 304 stainless steels using synchrotron X-ray tomography and diffraction: Influence of the martensite fraction and role of inclusions" (2022) DOI: 10.1016/j.matchar.2022.111903
Wurmshuber, M., Balooch, M., Huang, X., Hosemann, P., Kiener, D. "Helium-induced swelling and mechanical property degradation in ultrafine-grained W and W-Cu nanocomposites for fusion applications" (2022) DOI: 10.1016/j.scriptamat.2022.114641
Frazer, D., Cappia, F., Harp, J.M., Medvedev, P.G., McClellan, K.J., Voit, S.L., Giglio, J., Jädernäs, D., Hosemann, P. "Post-irradiation characterization of a high burnup mixed oxide fuel rod with minor actinides" (2022) DOI: 10.1016/j.jnucmat.2022.153545
Agarwal, S., Butterling, M., Liedke, M.O., Yano, K.H., Schreiber, D.K., Jones, A.C.L., Uberuaga, B.P., Wang, Y.Q., Chancey, M., Kim, H., Derby, B.K., Li, N., Edwards, D.J., Hosemann, P., Kaoumi, D., Hirschmann, E., Wagner, A., Selim, F.A. "The mechanism behind the high radiation tolerance of Fe-Cr alloys" (2022) DOI: 10.1063/5.0085086
Balooch, M., Allen, F.I., Popovic, M.P., Hosemann, P. "Mechanical and structural transformations of tungsten implanted with helium ions" (2022) DOI: 10.1016/j.jnucmat.2021.153436
2021 (36)
Gong, B., Frazer, D., Shaffer, B., Lim, H.C., Hosemann, P., Peralta, P. "Micro-cantilever beam experiments and modeling in porous polycrystalline UO2" (2021) DOI: 10.1016/j.jnucmat.2021.153210
Frazer, D., Hosemann, P., Jädernäs, D., Stergar, E. "Understanding nuclear fuel forms and structures" (2021) DOI: 10.1557/s43580-021-00186-y
Hosemann, P., Gigax, J.G. "Short-Pulsed Laser Techniques for Materials Modification, Characterization, and Synthesis" (2021) DOI: 10.1007/s11837-021-04975-6
Hosemann, P., Bai, S., Bickel, J., Qiu, J. "Corrosion Testing of Additively Manufactured FeCrAl Alloy in LBE" (2021) DOI: 10.1007/s11837-021-04947-w
Dong, A., Duckering, J., Peterson, J., Lam, S., Routledge, D., Hosemann, P. "Femtosecond Laser Machining of Micromechanical Tensile Test Specimens" (2021) DOI: 10.1007/s11837-021-04971-w
Hosemann, P., Auguste, R., Lam, S., Butterling, M., Liedke, M.O., Attallah, A.G., Hirschmann, E., Wagner, A., Grigoropoulos, C.P., Selim, F., Uberuaga, B.P. "Defect Characterization Using Positron Annihilation Spectroscopy on Laser-Ablated Surfaces" (2021) DOI: 10.1007/s11837-021-04965-8
Anderoglu, O., Marino, A., Hosemann, P. "Corrosion in Heavy Liquid Metals for Energy Systems" (2021) DOI: 10.1007/s11837-021-04973-8
Schmidt, F., Chancey, M., Kim, H., Wang, Y., Hosemann, P. "Continuous Monitoring of Pure Fe Corrosion in Lead-Bismuth Eutectic Under Irradiation with Proton-Induced X-ray Emission Spectroscopy" (2021) DOI: 10.1007/s11837-021-04954-x
Wongjaikham, W., Kongprawes, G., Wongsawaeng, D., Ngaosuwan, K., Kiatkittipong, W., Hosemann, P., Assabumrungrat, S. "Highly effective microwave plasma application for catalyst-free and low temperature hydrogenation of biodiesel" (2021) DOI: 10.1016/j.fuel.2021.121524
Genda, T., Knight, K., Dai, Z.R., Balboni, E., Goldblum, B.L., Hosemann, P. "Iron-rich microstructure records of high temperature multi-component silicate melt behavior in nuclear fallout" (2021) DOI: 10.1016/j.jenvrad.2021.106700
Kabel, J., Edwards, T.E.J., Sharma, A., Michler, J., Hosemann, P. "Direct observation of the elasticity-texture relationship in pyrolytic carbon via in situ micropillar compression and digital image correlation" (2021) DOI: 10.1016/j.carbon.2021.06.045
Cackett, A.J., Vo, H.T., Lim, J.J.H., Bushby, A.J., Hosemann, P., Hardie, C.D. "Effects of radiation damage and precipitate distribution on micro-pillar compression testing of irradiated CuCrZr" (2021) DOI: 10.1016/j.jnucmat.2021.153028
Vo, H.T., Dang, K., Teng, F., Schneider, M., Eftink, B.P., Maloy, S.A., Tucker, J.D., Capolungo, L., Hosemann, P. "Deformation twinning versus slip in Ni-based alloys, containing Pt2Mo-structured, Ni2Cr-typed precipitates" (2021) DOI: 10.1016/j.matdes.2021.109820
Schmidt, F., Hosemann, P., Scarlat, R.O., Schreiber, D.K., Scully, J.R., Uberuaga, B.P. "Effects of Radiation-Induced Defects on Corrosion" (2021) DOI: 10.1146/annurev-matsci-080819-123403
Wongjaikham, W., Wongsawaeng, D., Ratnitsai, V., Kamjam, M., Ngaosuwan, K., Kiatkittipong, W., Hosemann, P., Assabumrungrat, S. "Low-cost alternative biodiesel production apparatus based on household food blender for continuous biodiesel production for small communities" (2021) DOI: 10.1038/s41598-021-93225-5
Demir, K., Zhang, Z., Ben-Artzy, A., Hosemann, P., Gu, G.X. "Laser scan strategy descriptor for defect prognosis in metal additive manufacturing using neural networks" (2021) DOI: 10.1016/j.jmapro.2021.05.011
Qiu, J., Macdonald, D.D., Schoell, R., Han, J., Mastromarino, S., Scully, J.R., Kaoumi, D., Hosemann, P. "Electrochemical study of the dissolution of oxide films grown on type 316L stainless steel in molten fluoride salt" (2021) DOI: 10.1016/j.corsci.2021.109457
Hosemann, P., Sebastiani, M., Mughal, M.Z., Huang, X., Scott, A., Balooch, M. "Quantifying residual stress in Helium-implanted surfaces and its implication for blistering" (2021) DOI: 10.1557/s43578-021-00108-6
Haseman, M., Somodi, C.B., Stepanov, P., Wall, D.E., Boatner, L.A., Hosemann, P., Wang, Y.Q., Uberuaga, B.P., Selim, F.A. "Neutron irradiation induced defects in oxides and their impact on the oxide properties" (2021) DOI: 10.1063/5.0046292
Vo, H.T., Still, E.K., Kabel, J., Auguste, R., Schreiber, D.K., Chou, P.H., Hosemann, P. "Development of microscale bicrystal tensile testing for strength measurement of oxidized grain boundaries of alloy 600 exposed to PWR environments" (2021) DOI: 10.1016/j.msea.2021.141197
Kamjam, M., Wongjaikham, W., Wongsawaeng, D., Ngaosuwan, K., Kiatkittipong, W., Hosemann, P., Assabumrungrat, S. "Continuous biodiesel production based on hand blender technology for sustainable household utilization" (2021) DOI: 10.1016/j.jclepro.2021.126737
Mukherjee, T., DebRoy, T., Lienert, T.J., Maloy, S.A., Hosemann, P. "Spatial and temporal variation of hardness of a printed steel part" (2021) DOI: 10.1016/j.actamat.2021.116775
Kaspar, T.C., Taylor, S.D., Yano, K.H., Lach, T.G., Zhou, Y., Zhu, Z., Kohnert, A.A., Still, E.K., Hosemann, P., Spurgeon, S.R., Schreiber, D.K. "Bulk and Short-Circuit Anion Diffusion in Epitaxial Fe2O3 Films Quantified Using Buried Isotopic Tracer Layers" (2021) DOI: 10.1002/admi.202001768
Lupinacci, A., Kacher, J., Shapiro, A.A., Hosemann, P., Minor, A.M. "Cryogenic in-situ clamped beam testing of Sn96" (2021) DOI: 10.1557/s43578-021-00157-x
Vo, H.T., Anderoglu, O., Hosemann, P., Maloy, S.A. "The effects of microstructures and radiation damage on the deformation behavior of a HT-9 alloy using microtensile testing" (2021) DOI: 10.1016/j.matchar.2021.110972
Still, E.K., Schreiber, D.K., Wang, J., Hosemann, P. "Alpha Shape Analysis (ASA) Framework for Post- Clustering Property Determination in Atom Probe Tomographic Data" (2021) DOI: 10.1017/S1431927620024939
Drnovšek, A., Vo, H.T., de Figueiredo, M.R., Kolozsvári, S., Hosemann, P., Franz, R. "High temperature fracture toughness of single-layer CrAlN and CrAlSiN hard coatings" (2021) DOI: 10.1016/j.surfcoat.2021.126909
Kongprawes, G., Wongsawaeng, D., Hosemann, P., Ngaosuwan, K., Kiatkittipong, W., Assabumrungrat, S. "Improvement of oxidation stability of fatty acid methyl esters derived from soybean oil via partial hydrogenation using dielectric barrier discharge plasma" (2021) DOI: 10.1002/er.6121
Ben-Artzy, A., Reichardt, A., Borgonia, J.-P., Dillon, R.P., McEnerney, B., Shapiro, A.A., Hosemann, P. "Compositionally graded SS316 to C300 Maraging steel using additive manufacturing" (2021) DOI: 10.1016/j.matdes.2021.109500
Frazer, D., Shaffer, B., Gong, B., Peralta, P., Lian, J., Hosemann, P. "Elevated Temperature Nanoindentation Creep Study of Plastically Deformed and Spark Plasma Sintered UO2" (2021) DOI: 10.1016/j.jnucmat.2020.152605
Kabel, J., Edwards, T.E.J., Hain, C., Kochetkova, T., Parkison, D., Michler, J., Hosemann, P. "A novel fiber-fretting test for tribological characterization of the fiber/matrix interface" (2021) DOI: 10.1016/j.compositesb.2020.108535
Chen, J., Dang, K., Vo, H.T., Hosemann, P., Fensin, S.J. "Associating GB characteristics with its sink efficiency in absorbing Frank loops in Cu" (2021) DOI: 10.1016/j.scriptamat.2020.10.006
Wongsawaeng, D., Wongjaikham, W., Hosemann, P., Swantomo, D., Basuki, K.T. "Direct uranium recovery from brine concentrate using amidoxime adsorbents for possible future energy source" (2021) DOI: 10.1002/er.5845
Vo, H.T., Still, E.K., Lam, K., Drnovšek, A., Capolungo, L., Maloy, S.A., Chou, P., Hosemann, P. "Experimental methodology and theoretical framework in describing constrained plastic flow of FCC microscale tensile specimens" (2021) DOI: 10.1016/j.msea.2020.140124
Wurmshuber, M., Frazer, D., Balooch, M., Issa, I., Bachmaier, A., Hosemann, P., Kiener, D. "The effect of grain size on bubble formation and evolution in helium-irradiated Cu-Fe-Ag" (2021) DOI: 10.1016/j.matchar.2020.110822
Reichardt, A., Shapiro, A.A., Otis, R., Dillon, R.P., Borgonia, J.P., McEnerney, B.W., Hosemann, P., Beese, A.M. "Advances in additive manufacturing of metal-based functionally graded materials" (2021) DOI: 10.1080/09506608.2019.1709354
2020 (20)
Davis T.P., Auger M.A., Almirall N., Hosemann P., Odette G.R., Bagot P.A.J., Moody M.P., Armstrong D.E.J.; "Atom probe characterisation of segregation driven Cu and Mn–Ni–Si co-precipitation in neutron irradiated T91 tempered-martensitic steel" Materialia Vol. 14 (2020) https://doi.org/10.1016/j.mtla.2020.100946
Islam M.M., Liedke M.O., Winarski D., Butterling M., Wagner A., Hosemann P., Wang Y., Uberuaga B., Selim F.A.; "Chemical manipulation of hydrogen induced high p-type and n-type conductivity in Ga2O3" Scientific Reports Vol. 10 (2020) https://doi.org/10.1038/s41598-020-62948-2
Qiu J., Han J., Schoell R., Popovic M., Ghanbari E., Kaoumi D., Scully J.R., Macdonald D.D., Hosemann P.; "Electrical properties of thermal oxide scales on pure iron in liquid lead-bismuth eutectic" Corrosion Science Vol. 176 (2020) https://doi.org/10.1016/j.corsci.2020.109052
Losko A.S., Daemen L., Hosemann P., Nakotte H., Tremsin A., Vogel S.C., Wang P., Wittmann F.H.; "Separation of Uptake of Water and Ions in Porous Materials Using Energy Resolved Neutron Imaging" JOM Vol. 72 (2020) P. 3288-3295 https://doi.org/10.1007/s11837-020-04101-y
Frazer D., Shaffer B., Peralta P., Hosemann P.; "In-Situ Transmission Electron Microscopy Microcantilever and Nanoindentation Testing of UO2" JOM Vol. 72 (2020) P. 3028-3036 https://doi.org/10.1007/s11837-020-04102-x
Agarwal S., Liedke M.O., Jones A.C.L., Reed E., Kohnert A.A., Uberuaga B.P., Wang Y.Q., Cooper J., Kaoumi D., Li N., Auguste R., Hosemann P., Capolungo L., Edwards D.J., Butterling M., Hirschmann E., Wagner A., Selim F.A.; "A new mechanism for void-cascade interaction from nondestructive depth-resolved atomic-scale measurements of ion irradiation-induced defects in Fe" Science Advances Vol. 6 (2020) https://doi.org/10.1126/sciadv.aba8437
Schoell R., Frazer D., Zheng C., Hosemann P., Kaoumi D.; "In Situ Micropillar Compression Tests of 304 Stainless Steels After Ion Irradiation and Helium Implantation" JOM Vol. 72 (2020) P. 2778-2785 https://doi.org/10.1007/s11837-020-04127-2
Auguste R., Liedke M.O., Selim F.A., Uberuaga B.P., Wagner A., Hosemann P.; "Measurement and Simulation of Vacancy Formation in 2-MeV Self-irradiated Pure Fe" JOM Vol. 72 (2020) P. 2436-2444 https://doi.org/10.1007/s11837-020-04116-5
Hosemann P., Frazer D., Agarwal S., Yablinsky C.A.; "In-Situ Characterization Techniques for Investigating Nuclear Materials" JOM Vol. 72 (2020) P. 2030-2031 https://doi.org/10.1007/s11837-020-04130-7
Qiu J., Macdonald D.D., Li N., Schoell R., Kaoumi D., Hosemann P.; "An Electrochemical Impedance Spectroscopic Study of Oxide Films in Liquid Metal" JOM Vol. 72 (2020) P. 2082-2088 https://doi.org/10.1007/s11837-020-04120-9
Frazer D., Bair J.L., Homer E.R., Hosemann P.; "Cryogenic Stress-Driven Grain Growth Observed via Microcompression with in situ Electron Backscatter Diffraction" JOM Vol. 72 (2020) P. 2051-2056 https://doi.org/10.1007/s11837-020-04075-x
McCulloch Q., Gigax J.G., Hosemann P.; "Femtosecond Laser Ablation for Mesoscale Specimen Evaluation" JOM Vol. 72 (2020) P. 1694-1702 https://doi.org/10.1007/s11837-020-04045-3
Allen F.I., Hosemann P., Balooch M.; "Key mechanistic features of swelling and blistering of helium-ion-irradiated tungsten" Scripta Materialia Vol. 178 (2020) P. 256-260 https://doi.org/10.1016/j.scriptamat.2019.11.039
Bobbio L.D., Bocklund B., Reichardt A., Otis R., Borgonia J.P., Dillon R.P., Shapiro A.A., McEnerney B.W., Hosemann P., Liu Z.-K., Beese A.M.; "Analysis of formation and growth of the σ phase in additively manufactured functionally graded materials" Journal of Alloys and Compounds Vol. 814 (2020) https://doi.org/10.1016/j.jallcom.2019.151729
Stevenson S., Ben-Artzy A., Bernstein L., Hosemann P.; "Properties of a helium ion beam degrader for implanting SSJ2 tensile specimens at the LBL 88-inch cyclotron" Transactions of the American Nuclear Society Vol. 123 (2020) P. 173-175 https://doi.org/10.13182/T123-33452
Bhattacharyya D., Zhang F., Hosemann P.; "Advanced Characterization and Testing of Irradiated Materials" JOM Vol. 72 (2020) P. 110-112 https://doi.org/10.1007/s11837-019-03924-8
Vogel S.C., Bourke M.A.M., Craft A.E., Harp J.M., Kelsey C.T., Lin J., Long A.M., Losko A.S., Hosemann P., McClellan K.J., Roth M., Tremsin A.S.; "Advanced Postirradiation Characterization of Nuclear Fuels Using Pulsed Neutrons" JOM Vol. 72 (2020) P. 187-196 https://doi.org/10.1007/s11837-019-03849-2
Ajantiwalay T., Vo H., Finkelstein R., Hosemann P., Aitkaliyeva A.; "Towards Bridging the Experimental Length-Scale Gap for Tensile Tests on Structural Materials: Lessons Learned from an Initial Assessment of Microtensile Tests and the Path Forward" JOM Vol. 72 (2020) P. 113-122 https://doi.org/10.1007/s11837-019-03897-8
Frazer D., Deck C.P., Hosemann P.; "High-Temperature Nanoindentation of SiC/SiC Composites" JOM Vol. 72 (2020) P. 139-144 https://doi.org/10.1007/s11837-019-03860-7
Ambat M.V., Frazer D., Popovic M.P., Balooch M., Stevenson S., Scott A., Kabel J., Hosemann P.; "Localized Helium Implantation in SiCf/SiCm Composites Comparing Fiber and Matrix Swelling" JOM Vol. 72 (2020) P. 170-175 https://doi.org/10.1007/s11837-019-03869-y
2019 (21)
Parker S.S., White J.T., Hosemann P., Nelson A.T.; "Thermophysical properties of thorium mononitride from 298 to 1700 K" Journal of Nuclear Materials Vol. 526 (2019) https://doi.org/10.1016/j.jnucmat.2019.151760
Frazer D., Jadernas D., Bolender N., Madden J., Giglio J., Hosemann P.; "Elevated temperature microcantilever testing of fresh U-10Mo fuel" Journal of Nuclear Materials Vol. 526 (2019) https://doi.org/10.1016/j.jnucmat.2019.151746
Aydogan E., Martinez E., March K., El-Atwani O., Krumwiede D.L., Hosemann P., Saleh T., Maloy S.A.; "α′ formation kinetics and radiation induced segregation in neutron irradiated 14YWT nanostructured ferritic alloys" Scientific Reports Vol. 9 (2019) https://doi.org/10.1038/s41598-019-44508-5
Frazer D., Hosemann P.; "Plasticity of UO2 studied and quantified via elevated temperature micro compression testing" Journal of Nuclear Materials Vol. 525 (2019) P. 140-144 https://doi.org/10.1016/j.jnucmat.2019.07.022
Gigax J.G., Vo H., McCulloch Q., Chancey M., Wang Y., Maloy S.A., Li N., Hosemann P.; "Micropillar compression response of femtosecond laser-cut single crystal Cu and proton irradiated Cu" Scripta Materialia Vol. 170 (2019) P. 145-149 https://doi.org/10.1016/j.scriptamat.2019.05.004
Popovic M.P., Bolind A.M., Aussat Y., Gubser A.J., Hosemann P.; "Oxidative passivation of Fe–Cr–Al steels in lead-bismuth eutectic under oxygen-controlled static conditions at 700° and 800 °C" Journal of Nuclear Materials Vol. 523 (2019) P. 172-181 https://doi.org/10.1016/j.jnucmat.2019.06.004
Lenling M., Yeom H., Maier B., Johnson G., Dabney T., Graham J., Hosemann P., Hoelzer D., Maloy S., Sridharan K.; "Manufacturing Oxide Dispersion-Strengthened (ODS) Steel Fuel Cladding Tubes Using the Cold Spray Process" JOM Vol. 71 (2019) P. 2868-2873 https://doi.org/10.1007/s11837-019-03582-w
Wongjaikham W., Wongsawaeng D., Hosemann P.; "Synthesis of amidoxime polymer gel to extract uranium compound from seawater by UV radiation curing" Journal of Nuclear Science and Technology Vol. 56 (2019) P. 541-552 https://doi.org/10.1080/00223131.2019.1602485
Barnoush A., Hosemann P., Molina-Aldareguia J., Wheeler J.M.; "In situ small-scale mechanical testing under extreme environments" MRS Bulletin Vol. 44 (2019) P. 471-477 https://doi.org/10.1557/mrs.2019.126
Zayachuk Y., Karamched P., Deck C., Hosemann P., Armstrong D.E.J.; "Linking microstructure and local mechanical properties in SiC-SiC fiber composite using micromechanical testing" Acta Materialia Vol. 168 (2019) P. 178-189 https://doi.org/10.1016/j.actamat.2019.02.001
Wang J., Schreiber D.K., Bailey N., Hosemann P., Toloczko M.B.; "The Application of the OPTICS Algorithm to Cluster Analysis in Atom Probe Tomography Data" Microscopy and Microanalysis Vol. 25 (2019) P. 338-348 https://doi.org/10.1017/S1431927618015386
Aydogan E., Weaver J.S., Carvajal-Nunez U., Schneider M.M., Gigax J.G., Krumwiede D.L., Hosemann P., Saleh T.A., Mara N.A., Hoelzer D.T., Hilton B., Maloy S.A.; "Response of 14YWT alloys under neutron irradiation: A complementary study on microstructure and mechanical properties" Acta Materialia Vol. 167 (2019) P. 181-196 https://doi.org/10.1016/j.actamat.2019.01.041
Gong B., Frazer D., Yao T., Hosemann P., Tonks M., Lian J.; "Nano- and micro-indentation testing of sintered UO 2 fuel pellets with controlled microstructure and stoichiometry" Journal of Nuclear Materials Vol. 516 (2019) P. 169-177 https://doi.org/10.1016/j.jnucmat.2019.01.021
Mairov A., Frazer D., Hosemann P., Sridharan K.; "Helium irradiation of Y2O3-Fe bilayer system" Scripta Materialia Vol. 162 (2019) P. 156-160 https://doi.org/10.1016/j.scriptamat.2018.11.006
Howard C., Judge C.D., Hosemann P.; "Applying a new push-to-pull micro-tensile testing technique to evaluate the mechanical properties of high dose Inconel X-750" Materials Science and Engineering A Vol. 748, P. 396-406 (2019) https://doi.org/10.1016/j.msea.2019.01.113
Davis T.P., Armstrong D.E.J., Hosemann P.; "Microstructural evolution of neutron irradiated T91 steel in ATR" Transactions of the American Nuclear Society 121, P. 680-682 (2019) https://doi.org/10.13182/T31243
Lenling M., Yeom H., Maier B., Johnson G., Dabney T., Graham J., Hosemann P., Hoelzer D., Maloy S., Sridharan K.; "Development of cold spray process for manufacturing of oxide dispersion strengthened (ODS) steel cladding tubes" Transactions of the American Nuclear Society 120 P. 435-437 (2019)
Still E.K., Vo H., Lam K., Kabel J., Auguste R., Chou P., Hosemann P.; "In situ SEM microtensile testing of oxidized grain boundaries in Alloy 600" 19th International Conference on Environmental Degradation of Materials in Nuclear Power Systems, P. 632-636 (2019)
Vo H.T., Reinhardt A., Frazer D., Bailey N., Chou P., Hosemann P.; "In situ microtensile testing for ion beam irradiated materials" Minerals, Metals and Materials Series, P. 593-603 (2019) https://doi.org/10.1007/978-3-030-04639-2_38
C. Zheng, R. Schoell, P. Hosemann, D. Kaoumi; “Ion irradiation effects on commercial PH 13-8 Mo maraging steel Corrax” Journal of Nuclear Materials, Vol. 514, Feb. 2019, P.255-265 (2019) https://doi.org/10.1016/j.jnucmat.2018.11.041
Kabel J., Koyanagi T., Katoh Y., Schoell R., Kaoumi D., Ang C., Hosemann P.; "Interface characterization of candidate dual-purpose barrier coatings for SiC/SiC accident tolerant fuel cladding" 19th International Conference on Environmental Degradation of Materials in Nuclear Power Systems, (2019)
2018 (25)
Wurmshuber M., Frazer D., Bachmaier A., Wang Y., Hosemann P., Kiener D.; "Impact of interfaces on the radiation response and underlying defect recovery mechanisms in nanostructured Cu-Fe-Ag" Materials and Design Vol. 160, P. 1148-1157 (2018) https://doi.org/10.1016/j.matdes.2018.11.007
Yang Y., Frazer D., Balooch M., Hosemann P.; "Irradiation damage investigation of helium implanted polycrystalline copper" Journal of Nuclear Materials, Vol. 512, P. 137-143 https://doi.org/10.1016/j.jnucmat.2018.09.022
S. Saremi, R. Xu, F. I Allen, J. Maher, J. C Agar, R. Gao, P. Hosemann, L. W Martin; Local control of defects and switching properties in ferroelectric thin films; Phys Ref. Mat. (2018) in press. https://journals.aps.org/prmaterials/abstract/10.1103/PhysRevMaterials.2.084414
MP Popović, DL Olmsted, AM Bolind, M Asta, S Sohn, J Schroers, R Shao, P Hosemann, A study of the effects of minor additives to Pb-Bi eutectic: Designing novel Pb-Bi-X liquid alloys for heat transfer applications; Mat and Design 2018 in press. https://www.sciencedirect.com/science/article/pii/S0264127518306701
I. Winter, Z.J. wang, P. Hosemann, D. Chrzan, Impact of a dense helium-bubble superlattice on the deformation of copper by twinning; J. Nucl.Mat. 508 (2018) P. 481-487 https://www.sciencedirect.com/science/article/pii/S0022311517311078
A.Prasitthipayong, D.Frazer, A.Kareer, M.D.Abad A.Garner, B.Joni, T.Ungar, G.Ribarik, M.Preuss, , S.J.Tumey, A.M.Minor, P. Hosemann; Micro mechanical testing of candidate structural alloys for Gen-IV nuclear reactors; Nucl. Mat Energy; 16 (2018) P. 34-45 https://www.sciencedirect.com/science/article/pii/S235217911830022X
M. Popovich, Y. Yang, A. M. Bolind, V. B. Ozdol, D. L. Olmsted, M. Asta, P. Hosemann, Transmission Electron Microscopy (TEM) Study of the Oxide Layers Formed on Fe-12Cr-4Al Ferritic Alloy in an Oxygenated Pb-Bi Environment at 800°C; J. of Mat. In press 2018 https://link.springer.com/article/10.1007/s11837-018-2951-8
D.L.Krumwiede, T.Yamamoto, T.A.Saleh, S.A.Maloy, G.R.Odette, P. Hosemann, Direct comparison of nanoindentation and tensile test results on reactor-irradiated materials, J. Nucl. Mat. 504 (2018) P. 135-143 https://www.sciencedirect.com/science/article/pii/S0022311517317749
M.P.Popovic, K.Chen, H.Shen, C.V.Stan, D.L.Olmsted, N.Tamura, M.D.Abad, P.Hosemann, A study of deformation and strain induced in bulk by the oxide layers formation on a Fe-Cr-Al alloy in high-temperature liquid Pb-Bi eutectic, Acta Mat. 151 (2018) P. 301-309 https://www.sciencedirect.com/science/article/pii/S1359645418302398?via%3Dihub#!
W.Wongjaikham, D.Wongsawaeng, P.Hosemann, C.Kanokworakan, V.Ratnitsai, Enhancement of uranium recovery from seawater using amidoximated polymer gel synthesized from radiation-polymerization and crosslinking of acrylonitrile and methacrylic acid monomers, J, Env, Chem Eng, 6 (2018) P. 2768-2777 https://www.sciencedirect.com/science/article/pii/S2213343718301921
J. Kabel, P. Hosemann, Y. Zayachuk, D.E.Armstrong; Ceramic composites: A review of toughening mechanisms and demonstration of micropillar compression for interface property extraction; J. Mat Res. 33 (2018) P. 424-439 https://www.cambridge.org/core/journals/journal-of-materials-research/article/ceramic-composites-a-review-of-toughening-mechanisms-and-demonstration-of-micropillar-compression-for-interface-property-extraction/40A02F85E43A66E7ECB90717124B686F
S.S.Parker, J. White, P. Hosemann, A. Nelson, Oxidation Kinetics of Ferritic Alloys in High-Temperature Steam Environments, J. of Materials; 70 (2018) 896-904 A. Prasitthipayong, S.J. Vachhani, S.J. Tumey, A. Minor, P. Hosemann; Indentation size effect in unirradiated and ion-irradiated 800H steel at high temperatures, Acta Mat. 143 (2018) P. 161-168
P. Hosemann; Small-scale mechanical testing on nuclear materials: bridging the experimental length-scale gap; Scripta Mat 143 (2018) P. 161-168 https://www.sciencedirect.com/science/article/pii/S1359646217302026
P Hosemann, D Frazer, M Fratoni, A Bolind, MF Ashby; Materials selection for nuclear applications: Challenges and opportunities;Scripta Mat. 143(2018) P. 181-187 https://www.sciencedirect.com/science/article/pii/S1359646217302038
C, Howard, C.D.Judge, H.T.Vo, M. Griffiths, P. Hosemann; In situ SEM push-to-pull micro-tensile testing of ex-service inconel X-750; Minerals, Metals and Materials Series 9 (2018) P. 743-757
C. Howard, C.D.Judge, D. Poff, S. Parker, M. Griffiths, P. Hosemann; A novel in-situ, lift-out, three-point bend technique to quantify the mechanical properties of an ex-service neutron irradiated inconel X-750 component; J. Nucl. Mat. 498 (2018) P. 149-158 https://www.sciencedirect.com/science/article/pii/S0022311517309261
Prasitthipayong A., Vachhani S.J., Tumey S.J., Minor A.M., Hosemann P.; "Indentation size effect in unirradiated and ion-irradiated 800H steel at high temperatures" Acta Materialia Vol. 144, P. 896-904 (2018) https://doi.org/10.1016/j.actamat.2017.11.001
H.T. Vo, A. Reichardt, D. Frazer, N. Bailey, P. Chou, P. Hosemann; In situ microtensile testing for ion beam irradiated materials, Minerals, Metals and Materials Series 9 (2018) P. 593-603
A. Kareer, A. Prasitthipayong, D. Krumwiede, D.M. Collins, P. Hosemann, S.G.Roberts; An analytical method to extract irradiation hardening from nanoindentation hardness-depth curves; J. Nucl. Mat. 498 (2018) P. 274-281
Parker S.S., White J.T., Hosemann P., Nelson A.T.; "Synthesis, sintering, and thermophysical properties of thorium mononitride" Transactions of the American Nuclear Society 118, P. 1408-1411 (2018)
Kabel J., Hosemann P., Koyonagi T., Katoh Y.; "Micro-cantilever testing of environmental barrier coatings on CVD SiC" Transactions of the American Nuclear Society 118, P. 1647-1648 (2018)
Graham J.J., Sridharan K., Maier B.R., Yeom H., Hosemann P.; "A novel approach to advanced nanostructured materials manufacturing" Transactions of the American Nuclear Society 118, P. 729-730 (2018)
Popovic M.P., Yang Y., Hosemann P.; "The influence of Al content in steels and oxygen concentration in liquid LBE on the corrosion protection of structural steel candidates for generation IV FBRs" Transactions of the American Nuclear Society 118, P. 738-741 (2018)
Vo H., Teysseyre S., Hosemann P.; "Enhanced plasticity in 33 DPA neutron irradiated 304Ss with 2-3.7% swelling" Transactions of the American Nuclear Society 118, P. 1474-1475 (2018)
Popovic M.P., Yang Y., Hosemann P.; "The influence of Al content in steels and oxygen concentration in liquid LBE on the corrosion protection of structural steel candidates for generation IV FBRs" AISTech - Iron and Steel Technology Conference Proceedings May 2018, P. 738-741
2017 (10)
J. Kabel, Y. Yang, M. Balooch, Y. katoh, P. Hosemann; Micro-mechanical evaluation of SiC-SiC composite interphase properties and debond mechanisms; Composites B, 131 (2017) 173-183 https://www.sciencedirect.com/science/article/pii/S1359836817311502 H.C.Koh, P. Hosemann, A. Glaeser, C.Cionea, Compatibility studies on Mo–coating systems for nuclear fuel cladding applications, J. Nucl. Mat. 496(2017)367-378 https://www.sciencedirect.com/science/article/pii/S0022311517305184
J.S Weaver, S. Pathak, A. Reichardt, H. T Vo, S.A Maloy, P. Hosemann, N. A Mara; Spherical nanoindentation of proton irradiated 304 stainless steel: A comparison of small scale mechanical test techniques for measuring irradiation hardening;J. Nucl. Mat. 493(2017)368-370 https://www.sciencedirect.com/science/article/pii/S002231151631340X
R. Reuven, A. Bolind, N. Haneklaus, C. Cionea, C. Andreades, G. Buster, P. Hosemann, P. Peterson; Ni Interlayer to Improve Low-Pressure Diffusion Bonding of 316L SS Press Fit Tube-to-Tubesheet Joints for Coiled Tube Gas Heaters; Journal of Nuclear Engineering and Radiation Science 3 (2017) 030913-1-030913-6 http://nuclearengineering.asmedigitalcollection.asme.org/article.aspx?articleid=2598967
H.T.Vo, A. Reichardt, D. Frazer, N. Bailey, P. Chou. P. Hosemann; In situ micro-tensile testing on proton beam-irradiated stainless steel; J. Nucl. Mat. 493 (2017) 336-342 https://www.sciencedirect.com/science/article/pii/S0022311517300818
D. Frazer, J. Szornel, D.L. Krumwiede, K.A. Terrani, P. Hosemann; Evaluation of the Mechanical Properties of TRISO Particles Using Nanoindentation and Ring Compression Testing;Experimental Mechanics(2017) 1-10 https://link.springer.com/article/10.1007%2Fs11340-017-0277-z
M. Balooch, D.R. Olander, K.A. Terrani, P. Hosemann, A.M. Casella, D.J. Senor, E.C. Buck; Performance evaluation and post-irradiation examination of a novel LWR fuel composed of fuel pellets bonded to Zircaloy-2 cladding by lead bismuth eutectic; Journal of Nuclear Materials.486 (2017) 391-401 http://www.sciencedirect.com/science/article/pii/S0022311516306043
Reichardt, A. Lupinacci, D. Frazer, N. Bailey, H. Vo, C. Howard, Z. Jiao, A.M. Minor, P. Chou, P. Hosemann; Nanoindentation and in situ microcompression in different dose regimes of proton beam irradiated 304 SS; Journal of Nuclear Materials.486 (2017) 323-331 http://www.sciencedirect.com/science/article/pii/S0022311516310868
Wendy Gu, X. Ye, D.M. Koshy, S. Vachhani, P. Hosemann, A. Paul Alivisatos; Tolerance to structural disorder and tunable mechanical behavior in self-Assembled superlattices of polymer-grafted nanocrystals: Proceedings of the National Academy of Sciences of the United States of America.114 (2017) 2836-2841 http://www.pnas.org/content/114/11/2836
Howard, R. Fritz, M. Alfreider, D. Kiener, P. Hosemann; The influence of microstructure on the cyclic deformation and damage of copper and an oxide dispersion strengthened steel studied via in-situ micro-beam bending; Materials Science and Engineering A.687 (2017) 313-322 http://www.sciencedirect.com/science/article/pii/S0921509317301004
2016 (23)
Z.-J. Wang, F.I. Allen, Z.-W. Shan, P. Hosemann; Mechanical behavior of copper containing a gas-bubble superlattice; Acta Materialia.121 (2016) 78-84 http://www.sciencedirect.com/science/article/pii/S1359645416306796 Leitner, V. Maier-Kiener, J. Jeong, M.D. Abad, P. Hosemann, S.H. Oh, D. Kiener; Interface dominated mechanical properties of ultra-fine grained and nanoporous Au at elevated temperatures; Acta Materialia.121 (2016) 104-116 http://www.sciencedirect.com/science/article/pii/S1359645416306644 Vo, D. Frazer, N. Bailey, R. Traylor, J. Austin, J. Pringle, J. Bickel, R. Connick, W. Connick, P. Hosemann; Characterization of a Viking Blade Fabricated by Traditional Forging Techniques; JOM.68 (2016) 3174-3179 https://link.springer.com/article/10.1007%2Fs11837-016-2109-5 Haneklaus, C. Cionea, R. Reuven, D. Frazer, P. Hosemann, P.F. Peterson; Hybrid friction diffusion bonding of 316L stainless steel tube-to-tube sheet joints for coil-wound heat exchangers ; Journal of Mechanical Science and Technology.30 (2016) 4925-4930 https://link.springer.com/article/10.1007%2Fs12206-016-0832-z Frazer, S. Qvist, S. Parker, D.L. Krumwiede, M. Caro, J. Tesmer, S.A. Maloy, Y.Q. Wang, P. Hosemann; Degradation of HT9 under simultaneous ion beam irradiation and liquid metal corrosion; Journal of Nuclear Materials.479 (2016) 382-389 http://www.sciencedirect.com/science/article/pii/S0022311516302902 Reichardt, R.P. Dillon, J.P. Borgonia, A.A. Shapiro, B.W. McEnerney, T. Momose, P. Hosemann; Development and characterization of Ti-6Al-4V to 304L stainless steel gradient components fabricated with laser deposition additive manufacturing; Materials and Design.104 (2016) 404-413 http://www.sciencedirect.com/science/article/pii/S0264127516306062 Haneklaus, R. Reuven, C. Cionea, P. Hosemann, P.F. Peterson; Tube expansion and diffusion bonding of 316L stainless steel tube-to-tube sheet joints using a commercial roller tube expander; Journal of Materials Processing Technology.234 (2016) 27-32 http://www.sciencedirect.com/science/article/pii/S0924013616300644 Hosemann, D. Frazer, E. Stergar, K. Lambrinou; Twin boundary-accelerated ferritization of austenitic stainless steels in liquid lead-bismuth eutectic ; Scripta Materialia.118 (2016) 37-40 http://www.sciencedirect.com/science/article/pii/S1359646216300732 Beeler, M. Asta, P. Hosemann, N. Grønbech-Jensen; Effect of strain and temperature on the threshold displacement energy in body-centered cubic iron; Journal of Nuclear Materials .474 (2016) 113-119 http://www.sciencedirect.com/science/article/pii/S0022311516300861 Wu, J. Ciston, S. Kräemer, N. Bailey, G.R. Odette, P. Hosemann; The crystal structure, orientation relationships and interfaces of the nanoscale oxides in nanostructured ferritic alloys; Acta Materialia.111 (2016) 108-115 http://www.sciencedirect.com/science/article/pii/S1359645416301847 Hinojos, J. Mireles, A. Reichardt, P. Frigola, P. Hosemann, L.E. Murr, R.B. Wicker; Joining of Inconel 718 and 316 Stainless Steel using electron beam melting additive manufacturing technology; Materials and Design.94 (2016) 17-27 http://www.sciencedirect.com/science/article/pii/S0264127516300405 Jianu, R. Fetzer, A. Weisenburger, S. Doyle, M. Bruns, A. Heinzel, P. Hosemann, G. Mueller; Stability domain of alumina thermally grown on Fe-Cr-Al-based model alloys and modified surface layers exposed to oxygen-containing molten Pb; Journal of Nuclear Materials.470 (2016) 68-75 http://www.sciencedirect.com/science/article/pii/S0022311515303780 Huang, M.D. Abad, J.K. Ramsey, M.R. de Figueiredo, D. Kaoumi, N. Li, M. Asta, N. Gronbech-Jensen, P. Hosemann; A high temperature mechanical study on PH 13-8 Mo maraging steel; Materials Science and Engineering A.651 (2016) 574-582 http://www.sciencedirect.com/science/article/pii/S0921509315305402 Haneklaus, R. Reuven, C. Cionea, P. Hosemann, P.F. Peterson; Fabrication of diffusion bonded 316L Stainless steel Tube-To-Tube sheet joints for fhr coil tube gas heaters – An overview ; International Congress on Advances in Nuclear Power Plants, ICAPP 2016.3 (2016) 1879-1883 Frazer, M.D. Abad, C. Back, C. Deck, P. Hosemann; Multi scale characterization of SiC/SiC composite materials; Advanced Composites for Aerospace, Marine, and Land Applications (2016) 173-183 https://link.springer.com/chapter/10.1007%2F978-3-319-48096-1_15 Haneklaus, R. Reuven, C. Cionea, P. Hosemann, P.F. Peterson; Development of engineering parameters for low pressure diffusion bonds of 316 SS tube-to-tube sheet joints for fhr heat exchangers; TMS Annual Meeting (2016) 583-588 Y.N. Abousleiman, K.L. Hull, Y. Han, G. Al-Muntasheri, P. Hosemann, S. Parker, C.B. Howard; The granular and polymer composite nature of kerogen-rich shale; Acta Geotechnica .11 (2016) 573-594 https://link.springer.com/article/10.1007%2Fs11440-016-0435-y Cionea, M.D. Abad, Y. Aussat, D. Frazer, A.J. Gubser, P. Hosemann; Oxide scale formation on 316L and FeCrAl steels exposed to oxygen controlled static LBE at temperatures up to 800 °C; Solar Energy Materials and Solar Cells .144 (2016) 235-246 http://www.sciencedirect.com/science/article/pii/S0927024815004407 Vo, A. Reichardt, D. Frazer, C. Howard, M.D. Abad, P. Chou, P. Hosemann; Evaluation of mechanical properties of 304 ss after proton irradiation using small scale mechanical testing; International Congress on Advances in Nuclear Power Plants, ICAPP 2016.1 (2016) 232-237 Kabel, M. Balooch, D. Frazer, C. Deck, T. Koyanagi, K. Terrani, P. Hosemann; Characterization of sic-sic composites for application in current and advanced nuclear reactors; International Congress on Advances in Nuclear Power Plants, ICAPP 2016.2 (2016) 911-916 D.L. Krumwiede, M.D. Abad, T.A. Saleh, S.A. Maloy, G.R. Odette, T. Yamamoto, P. Hosemann; Initial studies on the correlation of nanohardness to engineering-scale properties of neutron-irradiated steels; International Congress on Advances in Nuclear Power Plants, ICAPP 2016.1 (2016) 224-229 K.L. Hull, Y.A. Abousleiman, Y. Han, G.A. Al-Muntasheri, P. Hosemann, E. Kendall-Still, C.B. Howard; Modernized mechanical testing of kerogen-rich shales (KRS) by monitoring in situ microscale tensile failures; 50th US Rock Mechanics / Geomechanics Symposium 2016.2 (2016) 1163-1169 Howard, D. Frazer, A. Lupinacci, S. Parker, R.Z. Valiev, C. Shin, B. William Choi, P. Hosemann; Investigation of specimen size effects by in-situ microcompression of equal channel angular pressed copper; Materials Science and Engineering A.649 (2016) 104-113 http://www.sciencedirect.com/science/article/pii/S0921509315304470
2015 (18) Hosemann, X. Li; Nanomechanical Measurements in Harsh Environments; JOM.67 (2015) 2900-2901 https://link.springer.com/article/10.1007%2Fs11837-015-1676-1 Vo, A. Reichardt, C. Howard, M.D. Abad, D. Kaoumi, P. Chou, P. Hosemann; Small-Scale Mechanical Testing on Proton Beam-Irradiated 304 SS from Room Temperature to Reactor Operation Temperature; JOM.67 (2015) 2959-2964 https://link.springer.com/article/10.1007%2Fs11837-015-1596-0 Reichardt, M. Ionescu, J. Davis, L. Edwards, R.P. Harrison, P. Hosemann, D. Bhattacharyya; In situ micro tensile testing of He+2 ion irradiated and implanted single crystal nickel film; Acta Materialia.100 (2015) 147-154 http://www.sciencedirect.com/science/article/pii/S1359645415006059 Koch, M.D. Abad, S. Renhart, H. Antrekowitsch, P. Hosemann; A high temperature nanoindentation study of Al-Cu wrought alloy; Materials Science and Engineering A.644 (2015) 218-224 http://www.sciencedirect.com/science/article/pii/S0921509315302185 T.L. Hoang, J. Marian, V.V. Bulatov, P. Hosemann; Computationally-efficient stochastic cluster dynamics method for modeling damage accumulation in irradiated materials; Journal of Computational Physics.300 (2015) 254-268 http://www.sciencedirect.com/science/article/pii/S0021999115005148 M.D. Abad, S. Parker, D. Frazer, M.R. de Figueiredo, A. Lupinacci, K. Kikuchi, P. Hosemann; Evaluation of the Mechanical Properties of Naturally Grown Multilayered Oxides Formed on HCM12A Using Small Scale Mechanical Testing; Oxidation of Metals.84 (2015) 211-231 https://link.springer.com/article/10.1007%2Fs11085-015-9551-6 M.D. Abad, S. Parker, D. Kiener, M.-M. Primorac, P. Hosemann; Microstructure and mechanical properties of CuxNb1-x< alloys prepared by ball milling and high pressure torsion compacting; Journal of Alloys and Compounds.630 (2015) 117-125 http://www.sciencedirect.com/science/article/pii/S0925838814030084 M.-M. Primorac, M.D. Abad, P. Hosemann, M. Kreuzeder, V. Maier, D. Kiener; Elevated temperature mechanical properties of novel ultra-fine grained Cu-Nb composites; Materials Science and Engineering A.625 (2015) 296-302 http://www.sciencedirect.com/science/article/pii/S092150931401507X Shin, S. Lim, H.-H. Jin, P. Hosemann, J. Kwon; Specimen size effects on the weakening of a bulk metastable austenitic alloy; Materials Science and Engineering A.622 (2015) 67-75 http://www.sciencedirect.com/science/article/pii/S0921509314013434 Hosemann, C. Shin, D. Kiener; Small scale mechanical testing of irradiated materials; Journal of Materials Research.30 (2015) 1231-1245 https://www.cambridge.org/core/journals/journal-of-materials-research/article/small-scale-mechanical-testing-of-irradiated-materials/E5467E6BD76229B21609FDE83F1D1680 Beeler, M. Asta, P. Hosemann, N. Grønbech-Jensen; Effect of interfaces on radiation damage accumulation in FeNiAl maraging steels; Transactions of the American Nuclear Society.112 (2015) 328-329 Beeler, M. Asta, P. Hosemann, N. Grønbech-Jensen; Effects of applied strain on radiation damage generation in body-centered cubic iron Journal of Nuclear Materials.459 (2015) 159-165 http://www.sciencedirect.com/science/article/pii/S0022311514010654 N.A. Bailey, E. Stergar, M. Toloczko, P. Hosemann; Atom probe tomography analysis of high dose MA957 at selected irradiation temperatures; Journal of Nuclear Materials.459 (2015) 225-234 http://www.sciencedirect.com/science/article/pii/S0022311515000100 Hofer, E. Stergar, S.A. Maloy, Y.Q. Wang, P. Hosemann; An intermetallic forming steel under radiation for nuclear applications; Journal of Nuclear Materials.458 (2015) 361-368 http://www.sciencedirect.com/science/article/pii/S0022311514010526 Frazer, M.D. Abad, D. Krumwiede, C.A. Back, H.E. Khalifa, C.P. Deck, P. Hosemann; Localized mechanical property assessment of SiC/SiC composite materials; Composites Part A: Applied Science and Manufacturing.70 (2015) 93-101 http://www.sciencedirect.com/science/article/pii/S1359835X14003479 Rebelo De Figueiredo, M.D. Abad, A.J. Harris, C. Czettl, C. Mitterer, P. Hosemann; Nanoindentation of chemical-vapor deposited Al2O3 hard coatings at elevated temperatures; Thin Solid Films.578 (2015) 20-24 http://www.sciencedirect.com/science/article/pii/S0040609015001145 K.L. Hull, Y.N. Abousleiman, Y. Han, G.A. Al-Muntasheri, P. Hosemann, S. Scott Parker, C.B. Howard ; New insights on the mechanical characterization of Kerogen-Rich Shale, KRS; Society of Petroleum Engineers – Abu Dhabi International Petroleum Exhibition and Conference, ADIPEC (2015) Lupinacci, K. Chen, Y. Li, M. Kunz, Z. Jiao, G.S. Was, M.D. Abad, A.M. Minor, P. Hosemann; Characterization of ion beam irradiated 304 stainless steel utilizing nanoindentation and Laue microdiffraction; Journal of Nuclear Materials.458 (2015) 70-76 http://www.sciencedirect.com/science/article/pii/S0022311514008411
2014 (10 publications) Kreuzeder, M.-D. Abad, M.-M. Primorac, P. Hosemann, V. Maier, D. Kiener; Fabrication and thermo-mechanical behavior of ultra-fine porous copper; Journal of Materials Science.50 (2014) 634-643 https://link.springer.com/article/10.1007%2Fs10853-014-8622-4 Lupinacci, J. Kacher, A. Eilenberg, A.A. Shapiro, P. Hosemann, A.M. Minor; Cryogenic in situ microcompression testing of Sn; Acta Materialia.78 (2014) 56-64 http://www.sciencedirect.com/science/article/pii/S1359645414004467 Landau, Q. Guo, P. Hosemann, Y. Wang, J.R. Greer; Deformation of as-fabricated and helium implanted 100 nm-diameter iron nano-pillars; Materials Science and Engineering A.612 (2014) 316-325 http://www.sciencedirect.com/science/article/pii/S0921509314007692 Oksiuta, P. Hosemann, S.C. Vogel, N. Baluc Microstructure examination of Fe-14Cr ODS ferritic steels produced through different processing routes Journal of Nuclear Materials 451 2014 320 327 ” http://www.sciencedirect.com/science/article/pii/S0022311514001925 Huang, A. Harris, S.A. Maloy, P. Hosemann; Nanoindentation creep study on an ion beam irradiated oxide dispersion strengthened alloy; Journal of Nuclear Materials.451 (2014) 162-167 http://www.sciencedirect.com/science/article/pii/S0022311514001615 Frazer, M.D. Abad, C. Back, C. Deck, P. Hosemann; Multi scale characterization of SiC/SiC composite materials; TMS Annual Meeting (2014) 173-183 Shin, S. Lim, H.-H. Jin, P. Hosemann, J. Kwon; Development and testing of microcompression for post irradiation characterization of ODS steels; Journal of Nuclear Materials.444 (2014) 43-48 http://www.sciencedirect.com/science/article/pii/S0022311513011008 G.R. Warrier, Y.S. Ju, J. Schroers, M. Asta, P. Hosemann; Development of high temperature liquid metal heat transfer fluids for CSP applications; ASME 2014 8th International Conference on Energy Sustainability, ES 2014 Collocated with the ASME 2014 12th International Conference on Fuel Cell Science, Engineering and Technology.1 (2014) http://proceedings.asmedigitalcollection.asme.org/proceeding.aspx?articleid=1920633 Frazer, C. Cionea, M. Popovic, Y. Aussat, A.J. Gubser, P. Hosemann; Lead-bismuth eutectic as a high temperature heat-transport fluid for thermal solar power; ASME 2014 8th International Conference on Energy Sustainability, ES 2014 Collocated with the ASME 2014 12th International Conference on Fuel Cell Science, Engineering and Technology.1 (2014) http://proceedings.asmedigitalcollection.asme.org/proceeding.aspx?articleid=1920619 Mori, T. Vogl, J. Haberl, W. Havlik, T. Schöberl, P. Hosemann; Erosion-corrosion rates of corrosion-resistant alloys under high-velocity multiphase conditions; Corrosion.70 (2014) 579-590 http://corrosionjournal.org/doi/10.5006/0886?code=nace-prem-site Guo, A. Persaud, S. Lidia, A.M. Minor, P. Hosemann, P.A. Seidl, T. Schenkel; Dynamic investigation of defects induced by short, high current pulses of high energy lithium ions; Materials Research Society Symposium Proceedings.1712 (2014) https://www.cambridge.org/core/journals/mrs-online-proceedings-library-archive/article/dynamic-investigation-of-defects-induced-by-short-high-current-pulses-of-high-energy-lithium-ions/A00BC039C58ECC3AB2AA622FD66B109F
2013 (9 publications) Schenkel, S.M. Lidia, C.D. Weis, W.L. Waldron, J. Schwartz, A.M. Minor, P. Hosemann, J.W. Kwan; Towards pump-probe experiments of defect dynamics with short ion beam pulses; Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms.315 (2013) 350-355 http://www.sciencedirect.com/science/article/pii/S0168583X13006708 Hosemann, J.N. Martos, D. Frazer, G. Vasudevamurthy, T.S. Byun, J.D. Hunn, B.C. Jolly, K. Terrani, M. Okuniewski; Mechanical characteristics of SiC coating layer in TRISO fuel particles; Journal of Nuclear Materials.442 (2013) 133-142 http://www.sciencedirect.com/science/article/pii/S0022311513010593 Caro, K. Woloshun, F. Rubio, S.A. Maloy, P. Hosemann; Heavy liquid metal corrosion of structural materials in advanced nuclear systems; JOM.65 (2013) 1057-1066 https://link.springer.com/article/10.1007%2Fs11837-013-0663-7 Van Den Bosch, O. Anderoglu, R. Dickerson, M. Hartl, P. Dickerson, J.A. Aguiar, P. Hosemann, M.B. Toloczko, S.A. Maloy; SANS and TEM of ferritic-martensitic steel T91 irradiated in FFTF up to 184 dpa at 413 °c; Journal of Nuclear Materials.440 (2013) 91-97 http://www.sciencedirect.com/science/article/pii/S0022311513006259 Guo, P. Landau, P. Hosemann, Y. Wang, J.R. Greer; Helium implantation effects on the compressive response of Cu nanopillars; Small.9 (2013) 691-696 http://onlinelibrary.wiley.com/doi/10.1002/smll.201201614/abstract Qvist, A.M. Bolind, P. Hosemann, Y. Wang, J. Tesmer, M.S. De Caro, M. Bourke; Capability demonstration of simultaneous proton beam irradiation during exposure to molten lead-bismuth eutectic for HT9 steel; Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment.698 (2013) 98-105 http://www.sciencedirect.com/science/article/pii/S016890021201042X Frazer, E. Stergar, C. Cionea, P. Hosemann; Liquid metal as a heat transport fluid for thermal solar power applications; Energy Procedia.49 (2013) 627-636 http://www.sciencedirect.com/science/article/pii/S1876610214005220?via%3Dihub A.M. Bolind, A.P. Shivprasad, D. Frazer, P. Hosemann; Essential aspects of controlling the oxygen content of molten tin in engineering applications; Materials and Design.52 (2013) 168-178 http://www.sciencedirect.com/science/article/pii/S0261306913004196 Hosemann, R. Dickerson, P. Dickerson, N. Li, S.A. Maloy; Transmission electron microscopy (TEM) on oxide layers formed on D9 stainless steel in lead bismuth eutectic (LBE); Corrosion Science.66 (2013) 196-202 http://www.sciencedirect.com/science/article/pii/S0010938X12004490
2012 (13 publications) Bailey, E. Sterger, M. Toloczko, P. Hosemann; Initial APT analysis of irradiated MA957; Transactions of the American Nuclear Society.106 (2012) 1309-1310 A.T. Nelson, P. Hosemann, S.A. Maloy; Development and analysis of diffusion bonding techniques for LBE-cooled spallation targets; Journal of Nuclear Materials.431 (2012) 185-195 http://www.sciencedirect.com/science/article/pii/S0022311511009627 Kiener, A.M. Minor, O. Anderoglu, Y. Wang, S.A. Maloy, P. Hosemann; Application of small-scale testing for investigation of ion-beam-irradiated materials; Journal of Materials Research.27 (2012) 2724-2736 https://www.cambridge.org/core/journals/journal-of-materials-research/article/application-of-smallscale-testing-for-investigation-of-ionbeamirradiated-materials/1D9A2438D22467F2A3AE2665356024BE R.B. Richter, P. Hosemann; The treatment and disposal of natural radioactive waste from the oil and natural gas industry – Potentials and limitations, Part 2 [NORM/TENORM behandlung und deponierung natürlicher radioaktiver rückstände der erdöl- und erdgasindustrie – Möglichkeiten und grenzen, Teil 2]; Aufbereitungs-Technik/Mineral Processing.53 (2012) 61-69 Anderoglu, J. Van Den Bosch, P. Hosemann, E. Stergar, B.H. Sencer, D. Bhattacharyya, R. Dickerson, P. Dickerson, M. Hartl, S.A. Maloy; Phase stability of an HT-9 duct irradiated in FFTF; Journal of Nuclear Materials.430 (2012) 194-204 http://www.sciencedirect.com/science/article/pii/S0022311512003443 Van Den Bosch, G. Coen, P. Hosemann, S.A. Maloy; On the LME susceptibility of Si enriched steels; Journal of Nuclear Materials.429 (2012) 105-112 http://www.sciencedirect.com/science/article/pii/S0022311512002486 R.B. Richter, P. Hosemann; The treatment and disposal of natural radioactive waste from the oil and natural gas industry – Potentials and limitations, part 1 [Behandlung und Deponierung natiirlicher radioaktiver Rückstände der Erdöl- und Erdgasindustrie – Möglichkeiten und Grenzen, Teil 1]; Aufbereitungs-Technik/Mineral Processing.53 (2012) 58-71 Hosemann, D. Kiener, Y. Wang, S.A. Maloy; Issues to consider using nano indentation on shallow ion beam irradiated materials; Journal of Nuclear Materials.425 (2012) 136-139 http://www.sciencedirect.com/science/article/pii/S0022311511010269 Hosemann, C. Hofer, G. Hlawacek, N. Li, S.A. Maloy, C. Teichert; Structural, electrical and magnetic measurements on oxide layers grown on 316L exposed to liquid lead-bismuth eutectic; Journal of Nuclear Materials.421 (2012) 140-146 http://www.sciencedirect.com/science/article/pii/S0022311511009974 Ciston, Y. Wu, G.R. Odette, P. Hosemann; The Structure of Nanoscale Precipitates and Precipitate Interfaces in an Oxide Dispersion Strengthened Steel; Microscopy and Microanalysis.18 (2012) 760-761 https://www.cambridge.org/core/journals/microscopy-and-microanalysis/article/structure-of-nanoscale-precipitates-and-precipitate-interfaces-in-an-oxide-dispersion-strengthened-steel/E342B5CAF719F14B65A94924B21C4E78 Rebelo de Figueiredo, K. Kikuchi, P. Hosemann Oxide-metal interfaces strength measurements on passive films formed in heavy liquid Microscopy and Microanalysis.18 (2012) 786-787 https://www.cambridge.org/core/journals/microscopy-and-microanalysis/article/oxidemetal-interfaces-strength-measurements-on-passive-films-formed-in-heavy-liquid/2061E22F2997D46D02189720BA4696F4 Lupinacci, A. Shapiro, P. Hosemann, A.M. Minor; In-Situ SEM Characterization of Fracture Behavior; Microscopy and Microanalysis.18 (2012) 792-793 https://www.cambridge.org/core/journals/microscopy-and-microanalysis/article/insitu-sem-characterization-of-fracture-behavior/1FF937F2D754F669DBD126AAB3A4A5EB A.M. Minor, D. Kiener, P. Hosemann; Connecting In situ TEM Mechanical Testing with Bulk Properties of Irradiated Materials; Microscopy and Microanalysis.18 (2012) 1344-1345 https://www.cambridge.org/core/journals/microscopy-and-microanalysis/article/connecting-in-situ-tem-mechanical-testing-with-bulk-properties-of-irradiated-materials/84022EE3C2EB8091AEAAAF4CADC05DF7 Frazer, C.A. Back, C. Deck, H. Khalifa, P. Hosemann; Nano/Micro Scale Characterization of SiC/SiC Composite Materials; Microscopy and Microanalysis.18 (2012) 1420-1421 https://www.cambridge.org/core/journals/microscopy-and-microanalysis/article/nanomicro-scale-characterization-of-sicsic-composite-materials/3B37F20D9794DA589C1BADB0DF3B1E51
2011 (7 publications) S.A. Maloy, T.J. Romero, P. Hosemann, M.B. Toloczko, Y. Dai ; Shear punch testing of candidate reactor materials after irradiation in fast reactors and spallation environments;Journal of Nuclear Materials.417 (2011) 1005-1008 http://www.sciencedirect.com/science/article/pii/S0022311511001887 Hosemann, E. Stergar, L. Peng, Y. Dai, S.A. Maloy, M.A. Pouchon, K. Shiba, D. Hamaguchi, H. Leitner; Macro and microscale mechanical testing and local electrode atom probe measurements of STIP irradiated F82H, Fe-8Cr ODS and Fe-8Cr-2W ODS; Journal of Nuclear Materials.417 (2011) 274-278 http://www.sciencedirect.com/science/article/pii/S0022311510010226 Hosemann, E. Stergar, A.T. Nelson, C. Vieh, S.A. Maloy; Nanostructured engineering alloys for nuclear application; Materials Research Society Symposium Proceedings.1298 (2011) 217-226 https://www.cambridge.org/core/journals/mrs-online-proceedings-library-archive/article/nanostructured-engineering-alloys-for-nuclear-application/7E97743051398BBBB1ECD9AFE97E6576 Hosemann, Y. Dai, E. Stergar, H. Leitner, E. Olivas, A.T. Nelson, S.A. Maloy; Large and Small Scale Materials Testing of HT-9 Irradiated in the STIP Irradiation Program; Experimental Mechanics.51 (2011) 1095-1102 https://link.springer.com/article/10.1007%2Fs11340-010-9419-2 Kiener, P. Hosemann, S.A. Maloy, A.M. Minor; In situ nanocompression testing of irradiated copper; Nature Materials.10 (2011) 608-613 https://www.nature.com/nmat/journal/v10/n8/full/nmat3055.html West, B. Jasthi, P. Hosemann, V. Sodesetti; Friction stir welding of oxide dispersion strengthened alloy MA956;TMS Annual Meeting (2011) 33-40 http://onlinelibrary.wiley.com/doi/10.1002/9781118062302.ch5/summary Hosemann, Y. Dai, E. Stergar, A.T. Nelson, S.A. Maloy; Small-scale testing of in-core fast reactor materials; Journal of Nuclear Science and Technology; 48 (2011) 575-579 http://www.tandfonline.com/doi/abs/10.1080/18811248.2011.9711735
2010 (5 publications) S.A. Maloy, P. Hosemann, J. Vanden Bosch, M. Toloczko, J. Cole, T.S. Byun; Development and testing of radiation tolerant clad materials for nuclear fuels; Transactions of the American Nuclear Society.102 (2010) 701 Zhang, P. Hosemann, S. Maloy; Models of liquid metal corrosion; Journal of Nuclear Materials.404 (2010) 82-96 http://www.sciencedirect.com/science/article/pii/S0022311510002369 Hosemann, S. Kabra, E. Stergar, M.J. Cappillo, S.A. Maloy; Micro-structural characterization of laboratory heats of the Ferric/Martensitic steels HT-9 and T91; Journal of Nuclear Materials.403 (2010) 7-14 http://www.sciencedirect.com/science/article/pii/S0022311510001959 Chen, J.F. Stubbins, P. Hosemann, A.M. Bolind; Analysis of corrosion scale structure of pre-oxidized stainless steel 316 in molten lead bismuth eutectic and the relation to impedance spectroscopy response; Journal of Nuclear Materials.398 (2010) 172-179 http://www.sciencedirect.com/science/article/pii/S002231150900837X Van den Bosch, P. Hosemann, A. Almazouzi, S.A. Maloy; Liquid metal embrittlement of silicon enriched steel for nuclear applications; Journal of Nuclear Materials.398 (2010) 116-121 http://www.sciencedirect.com/science/article/pii/S0022311509008289
2009 (5 publications) Haberl, G. Mori, P. Wagner, W. Havlik, P. Hosemann; How do microstructure and pren affect the erosion corrosion behaviour of stainless steels?; NACE – International Corrosion Conference Series (2009) G.R. Odette, N.J. Cunningham, E.A. Marquis, S. Lozano-Perez, V. De Castro, P. Hosemann, E. Stergar, S. Liu, C.U. Segre; Atom-probe tomography, small angle neutron scattering, transmission electron microscopy, positron annihilation spectroscopy and x-ray absorption spectroscopy characterization of nano-scale features in nanostructured ferritic alloys; Microscopy and Microanalysis.15 (2009) 244-245 https://www.cambridge.org/core/journals/microscopy-and-microanalysis/article/atomprobe-tomography-small-angle-neutron-scattering-transmission-electron-microscopy-positron-annihilation-spectroscopy-and-xray-absorption-spectroscopy-characterization-of-nanoscale-features-in-nanostructured-ferritic-alloys/14D0B7873B5B995AF0DC21996CD28EA2 D.C. Foley, K.T. Hartwig, S.A. Maloy, P. Hosemann, X. Zhang; Grain refinement of T91 alloy by equal channel angular pressing; Journal of Nuclear Materials.389 (2009) 221-224 http://www.sciencedirect.com/science/article/pii/S0022311509003432 Hosemann, C. Vieh, R.R. Greco, S. Kabra, J.A. Valdez, M.J. Cappiello, S.A. Maloy; Nanoindentation on ion irradiated steels; Journal of Nuclear Materials.389 (2009) 239-247 http://www.sciencedirect.com/science/article/pii/S0022311509003468 Hosemann, S.A. Maloy, R.R. Greco, J.G. Swadener, T. Romero; Oxygen effects on irradiated tantalum alloys; Journal of Nuclear Materials.384 (2009) 25-29 http://www.sciencedirect.com/science/article/pii/S0022311508005618
2008 (15 publications) Haberl, G. Mori, P. Wagner, W. Havlik, P. Hosemann; Influence of strength on the erosion corrosion rate of stainless steels; 17th International Corrosion Congress 2008: Corrosion Control in the Service of Society.4 (2008) 2043-2058 A.T. Nelson, D.E. Dombrowski, S.A. Maloy, P. Hosemann, N.D. Hubele; Development of diffusion-bonding parameters for tungsten and tantalum to steel; Proceedings of the 7th International Conference on Tungsten, Refractory and Hardmaterials (2008) 9139-9157 Haberl, G. Mori, M. Oberndorfer, W. Havlik, P. Hosemann, M. Hawley, J.G. Swadener; Influence of impact angles on penetration rates of CRAs exposed to a high velocity multiphase flow; NACE – International Corrosion Conference Series (2008) 80961-809619 Hosemann, M.E. Hawley, D. Koury, J. Welch, A.L. Johnson, G. Mori, N. Li, S.A. Maloy; Nanoscale characterization of HT-9 exposed to lead bismuth eutectic at 550 °C for 3000 h; Journal of Nuclear Materials.381 (2008) 211-215 http://www.sciencedirect.com/science/article/pii/S0022311508002067 Kunkle, A.T. Motta, R.J. Comstock, P. Hosemann; Characterization of HT-9 ferritic-martensitic steels oxidized in lead bismuth eutectic; Transactions of the American Nuclear Society.98 (2008) 1115-1116 S.A. Maloy, P. Hosemann, C. Vieh, T. Romero, M. Toloczko; Core materials development and testing for the global nuclear energy partnership’s advanced burner reactor; Transactions of the American Nuclear Society.98 (2008) 1004-1005 Hosemann, E. Stergar, C. Vieh, R.R. Greco, M.J. Cappiello, S.A. Maloy; Micro mechanic testing and local electrode atom probe microscope (LEAP) measurements on oxide dispersed strengthened (ODS) alloys; Transactions of the American Nuclear Society.98 (2008) 1123-1124 Hosemann, J.G. Swadener, J. Welch, N. Li; Nano-indentation measurement of oxide layers formed in LBE on F/M steels; Journal of Nuclear Materials.377 (2008) 201-205 http://www.sciencedirect.com/science/article/pii/S002231150800144X Hosemann, M. Hawley, G. Mori, N. Li, S.A. Maloy; AFM and MFM characterization of oxide layers grown on stainless steels in lead bismuth eutectic; Journal of Nuclear Materials.376 (2008) 289-292 http://www.sciencedirect.com/science/article/pii/S0022311508000688 Hosemann, R.R. Greco, I. Usov, Y. Wang, S.A. Maloy, N. Li; The design, setup and operational testing of the irradiation and corrosion experiment (ICE); Journal of Nuclear Materials.376 (2008) 392-395 http://www.sciencedirect.com/science/article/pii/S0022311508000883 K.E. Sickafus, M. Ishimaru, Y. Hirotsu, I.O. Usov, J.A. Valdez, P. Hosemann, A.L. Johnson, T.T. Thao; Compositional analyses of ion-irradiation-induced phases in δ-Sc4Zr3O12; Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms.266 (2008) 2892-2897 http://www.sciencedirect.com/science/article/pii/S0168583X08004096 Hosemann, M. Hawley, D. Koury, J.G. Swadener, J. Welch, A.L. Johnson, G. Mori, N. Li; Characterization of oxide layers grown on D9 austenitic stainless steel in lead bismuth eutectic; Journal of Nuclear Materials.375 (2008) 323-330 http://www.sciencedirect.com/science/article/pii/S0022311508000287 Hosemann, J.G. Swadener, D. Kiener, G.S. Was, S.A. Maloy, N. Li; An exploratory study to determine applicability of nano-hardness and micro-compression measurements for yield stress estimation; Journal of Nuclear Materials .375 (2008) 135-143 http://www.sciencedirect.com/science/article/pii/S002231150701063X Hosemann, H.T. Thau, A.L. Johnson, S.A. Maloy, N. Li;Corrosion of ODS steels in lead-bismuth eutectic ; Journal of Nuclear Materials.373 (2008) 246-253 http://www.sciencedirect.com/science/article/pii/S0022311507008288 Hosemann, F. Olivas, N. Li; Corrosion resistance of ferritic/martensitic ODS alloys in LBE environment and application of MA956; Transactions of the American Nuclear Society.94 (2006) 749
